Heat pumps are one of the most amazing inventions meant for our comfort. Unlike other HVAC systems, a heat pump can provide cooling and heating. However, like most machines, a heat pump can break down at any time. Nothing can be awful than a heat pump not blowing cold air on a hot sunny day!
There can be various reasons behind clogged air filters to malfunctioning thermostats. Before you contact a heat pump repair Kansas City, look at some of the most common reasons.
5 Reasons Your Heat Pump is Not Working
If your heat pump stops suddenly, check the power supply of your other heat pump system components. Each component might have its own power switches and dedicated circuits.
Firstly, check if the power switch near the indoor unit is ON. Secondly, the power switch located on the outside unit also needs to be set to ON. At last, go to your home’s electrical panel to examine the circuits controlling both the indoor and outdoor units.
If you see any tripped breaker or a blown-out fuse, call professional furnace replacement Kansas City KS.
When heat pumps stop working, a malfunctioning thermostat can be the culprit. Locate the thermostat and see if the display is on or not. If it doesn’t display anything, it means there is no power supply.
However, if you have battery-powered units, just replace old batteries with new ones. While for the hardwired units, check your home’s electrical panel as mentioned above.
Wrong Thermostat Settings
Apart from the disrupted power supply and dead batteries, a thermostat can go bad simply due to the wrong settings. Your thermostat only allows your heat pump to cool if temperatures inside your home rise above a certain point. Try adjusting the thermostat’s set temperature down several degrees, which should trigger the heat pump to run a cooling cycle.
Ductwork makes up a significant part of an HVAC system responsible for distributing the air. If your home’s ductwork becomes clogged due to a lack of cleaning, the heat pump won’t be able to blow adequate air. At the same time, any leaks will let the air out before reaching you.
In such cases, call professional heating services in Kansas City to examine the ducts for blockage and leaks.
Dirty Air Filters
As soon as your heat pump stops working, inspect the air filters. If you see a lot of gunk accumulated on them, it has probably blocked the airflow resulting in a shutdown. If this is the case, replace the filters with fresh ones and let the system cool down for a bit.
If your heat pump has stopped working, there can be one or more reasons listed above. Thankfully, we can fix this issue in no time. We take pride in performing the best heat pump and furnace repairs in Kansas City.
Ring us today at (913) 687-1494 to register and schedule a complete heat pump service at a minimal cost. You deserve the best!