Seven Furnace Efficiency Tips To Save Energy

As the weather cools down, you find yourself spending more time indoors, and therefore, even end up using more energy as a result. Furnace efficiency is most important for enjoying a warm and comfortable stay indoors, especially in the coming months. 

Delta T Heating & Cooling Providing heating services Kansas City and surrounding areas. It is essential to be smart in energy spending and smarter as the mercury dips outside. We have enumerated seven furnace efficiency tips, which could save you a lot of energy and money. 

Seven Tips To Save Energy This Winter:

  • Clean and Change Your Air Filters:

Since furnaces are used so actively in winters, the filters of your furnaces can get clogged with dust and dirt, thereby reducing the amount of warm air reaching inside your house. That will lead you to raise the temperatures of your heating systems, which will be a reason for higher electricity bills. Check your filters regularly and clean them every month. It is essential to change your filters at least every three months. 

  • Don’t Block The Air Vents:

Take a look around your house and check if there are any obstructions near your air vents. Remove any unwanted furniture or drapes that could block warm air coming from your furnace. Vacuum the vents opening to keep them clean and free of dust or dirt. 

  • Switch To a Smart Thermostat:

A smart thermostat is a smart way to save electricity in the winter. Programmable thermostats allow you to fine-tune and optimize your furnace as required. You can also program the thermostat to turn down when you are asleep or away and then set it warmer for just before your arrival back home. In winter, you can reduce your electricity bill by spending a little on a smart thermostat. 

  • Put on Your Woolens:

On days when it gets extremely cold, instead of just raising the temperature of your thermostat, it will be better to put on some warm clothes to feel comfortable indoors. Warmer clothing will save your energy as well as money. 

  • Weatherstrip Doors and Windows:

Most of the warm air in the house is lost through the gaps and crevices on doors and windows. You can put a stop to it by weatherstripping them. Additionally, door sweeps and draft stoppers can stop air from leaking out and give you some protection from the cold.

  • Upgrade Your Furnace:

Older furnaces usually have a lesser efficiency range than newer ones. Studies show that modern high-efficiency heating systems can provide up to 90%-95% efficiency. Buying a new model might also get you some offers and rebates and help you cut down on your energy bills. You must contact a certified furnace replacement Kansas City KS, for assistance in this regard. 

  • Get Regular Furnace Maintenance:

One of the surest ways to reduce your energy bills is to call for HVAC maintenance before the onset of winters. Getting your furnaces inspected by HVAC professionals will increase their efficiency and lifespan. 

We’re here to help!

If you are looking for a reliable furnace repair Kansas City, KS – feel free to contact Delta T Heating and Cooling. Our qualified team will help you keep your home warmer. Just visit our website or give a call on (913) 687 1494

Why Is My Heat Pump Not Working?

Heat pumps are one of the most amazing inventions meant for our comfort. Unlike other HVAC systems, a heat pump can provide cooling and heating. However, like most machines, a heat pump can break down at any time. Nothing can be awful than a heat pump not blowing cold air on a hot sunny day!

There can be various reasons behind clogged air filters to malfunctioning thermostats. Before you contact a heat pump repair Kansas City, look at some of the most common reasons.

5 Reasons Your Heat Pump is Not Working

  • Power Issues

If your heat pump stops suddenly, check the power supply of your other heat pump system components. Each component might have its own power switches and dedicated circuits.

Firstly, check if the power switch near the indoor unit is ON. Secondly, the power switch located on the outside unit also needs to be set to ON. At last, go to your home’s electrical panel to examine the circuits controlling both the indoor and outdoor units.

If you see any tripped breaker or a blown-out fuse, call professional furnace replacement Kansas City KS.

  • Malfunctioning Thermostat

When heat pumps stop working, a malfunctioning thermostat can be the culprit. Locate the thermostat and see if the display is on or not. If it doesn’t display anything, it means there is no power supply.

However, if you have battery-powered units, just replace old batteries with new ones. While for the hardwired units, check your home’s electrical panel as mentioned above. 

  • Wrong Thermostat Settings

Apart from the disrupted power supply and dead batteries, a thermostat can go bad simply due to the wrong settings. Your thermostat only allows your heat pump to cool if temperatures inside your home rise above a certain point. Try adjusting the thermostat’s set temperature down several degrees, which should trigger the heat pump to run a cooling cycle.

  • Leaky Ductwork

Ductwork makes up a significant part of an HVAC system responsible for distributing the air. If your home’s ductwork becomes clogged due to a lack of cleaning, the heat pump won’t be able to blow adequate air. At the same time, any leaks will let the air out before reaching you.

In such cases, call professional heating services Kansas City to examine the ducts for blockage and leaks.

  • Dirty Air Filters

As soon as your heat pump stops working, inspect the air filters. If you see a lot of gunk accumulated on them, it has probably blocked the airflow resulting in a shutdown. If this is the case, replace the filters with fresh ones and let the system cool down for a bit.

If your heat pump has stopped working, there can be one or more reasons listed above. Thankfully, we can fix this issue in no time. We take pride in performing the best heat pump and furnace repairs Kansas City.

Ring us today at (913) 687-1494 to register and schedule a complete heat pump service at a minimal cost. You deserve the best!

HVAC For Beginners: Significant The Components and What They All Do

Is It Important To Know The Components Of HVAC Systems?

Heating, ventilation, and air conditioning systems not only regulate the temperature of a space (mostly indoors) but are also responsible for delivering clean air to ensure comfort when required.

Because your system includes various components, knowing about them is quite useful for appreciating the quality of their construction and mapping out what your system may need to perform as you would like. Let’s understand the components and their uses in brief.

Thermostat

Temperature sensors on thermostats tell them when to turn on or off the heater or air conditioner. Different thermally controlled zones could exist, each needing its thermostat. 

It would help if you positioned the thermostat at least two meters away from areas where temperature differences are concentrated compared to the average temperature of the intended space.

Heat Generator

When it comes to heating, the heat generator is the most important HVAC component. Fuel is burned inside combustion chambers to produce heat, like in a furnace. 

Flue gas heat will then be transferred to nearby air or another fluid, such as water, to heat the air in the conditioned environment. It is also possible to heat the air by using electric heat generation. Schedule a heat pump repair Kansas city with Delta T Heating.

Blower

Blowers are responsible for forcing air through the heat exchanger into the air ducting to take the warm air to its destination. Powered by an electric motor, a shaft drives the blower. By changing the motor speed, you can adjust the flow of air. Variable speed motors are recommended for such applications.

Condenser Coil Or Compressor

The compressor or condenser coil is usually located outdoors, and it is one of the key components of the HVAC system. Upon warming up, the refrigerant gas goes to the compressor and becomes liquid in the atmosphere. The liquid refrigerant is transported by copper or aluminium tubes. A fan will increase airflow, thereby increasing condensation.

Evaporator Coil

Evaporator coils are among the indoor components of HVAC systems that receive condensed liquid refrigerant from the compressor. A spray nozzle atomizes the liquid refrigerant, causing it to evaporate faster when it has contact with the warm air present in a room.

Air Ducts And Vents

Different components of the HVAC system receive air via ducts. For a zone to receive high-quality air, ducting must be of good quality. The system could make noise if there is a leak in the ductwork. If the air ducts are in bad condition, odors and excess moisture can fill the air.

Heat Exchanger

Heating and air conditioning systems include heat exchangers that convert heat from heat generation units into other fluids. Control units may activate the heater or electric heating elements to regulate the air temperature passing through a heat exchanger.

Call (913 687-1494) or schedule a furnace repair Kansas City with Delta T Heating and Cooling. We also provide heating services Kansas City and surrounding areas.