Why Is My Heat Pump Making Loud Noises?

If your heat pump is making loud noises, it could be a sign that something is wrong with your unit. In some cases, the noise may be due to a simple issue like loose screws or debris in the fan. However, it could also be a sign of a major problem, such as a compressor failure.

If you’re unsure of what’s causing the noise, it’s best to call Delta T Heating and Cooling for a technician for heat pump repair in Kansas City. We have been providing heating and cooling services to the area for more than 20 years. In addition, we have licensed and highly skilled heat pump technicians who can help diagnose and repair your heat pump.

Reasons That Your Heat Pump Is Making Loud Noises

Here are some causes of heat pump noises:

  • Loose screws or debris in the fan: If you hear rattling or banging noises, it could be due to loose screws or debris in the fan. It is usually an easy problem to fix, and you may be able to do it yourself.
  • Compressor failure: If you hear a loud humming noise, it could be a sign that the compressor is failing. It is a serious problem that will require professional heat pump repair. Contact Delta T Heating and
  • Cooling for an HVAC contractor in Kansas City.
  • Dirty coils: If you hear a hissing noise, it could be due to dirty coils. For the best coil cleaning service, call us today.
  • Worn-out bearings: If you hear a grinding noise, it could be a sign that the bearings are worn out. This is a serious problem that requires professional heat pump repair in Kansas City.

If you’re unsure what’s causing the noise, it’s best to call Delta T Heating and Cooling for a heating repair in Kansas City. Our expert technicians will be able to diagnose the problem and recommend the best course of action.

Ways To Reduce Heat Pump Noise

There are a few ways to reduce the noise of heat pumps which are as follows:

  • Replace Fan and Motor: One way to reduce heat pump noise is by replacing the fan and motor.
  • Sound Dampening Insulation: Another way to reduce heat pump noise is by adding sound-dampening insulation. It will help to absorb the noise and make it less noticeable.
  • Installation of Compressor Sound Blanket Wraps: It may be necessary to install compressor sound blanket wraps. It will help to reduce the noise of the compressor.
  • Replace The Unit: In some cases, you may need to replace the heat pump unit. It is a major decision, and you should consult with the experts at Delta T Heating and Cooling before making a final decision.

Though you can find DIY tutorials on the internet, we recommend hiring a professional heat pump repair company to do all the above tasks as it requires technical expertise to complete them safely and efficiently. In Kansas City, we are the right choice for you.

If you decide to replace your noisy heat pump, technicians at Delta T Heating and Cooling can help you choose the best heat pump for your home or business. We have a wide selection of heat pumps from leading manufacturers. Contact us today to learn more about our heating services in Kansas City.

Frequently Asked Questions

When the temperature drops and your home becomes your refuge from the winter chill, the last thing you want is a noisy, inefficient heating system. Homeowners know that peace and comfort go hand in hand, and a quiet, well-functioning heat pump is key to achieving both. In this blog, we'll delve into the world of Delta T Heating and Cooling, your trusted HVAC experts in Kansas City, KS. We'll address common concerns about heat pump noises, maintenance, and troubleshooting, all with a focus on ensuring your home remains a haven of warmth and serenity.

A mysterious and disconcerting sound emanating from your heat pump can quickly disrupt the tranquility of your home. So, what can you do when faced with this issue?
Why is my heat pump making loud noises? It's time to get to the root of the problem. Noise can be indicative of various issues, and identifying the source is the first step to resolution.

Possible Causes of Loud Heat Pump Noises:

  • Loose or Damaged Components: Loose or damaged parts within the heat pump can generate rattling or clanking noises.
  • Refrigerant Leaks: Hissing or gurgling sounds may indicate a refrigerant leak, which can affect your system's performance.
  • Fan Issues: The blower fan or outdoor fan may become misaligned or clogged, leading to noise problems.

Do heat pumps require regular maintenance?

Regular maintenance is the backbone of a well-functioning heat pump system. As a homeowner, it's essential to understand the importance of routine upkeep to keep your heat pump running smoothly.

Key Maintenance Aspects:

  • Cleaning and Airflow Check: Cleaning the heat pump's components and ensuring proper airflow is crucial for optimal performance.
  • Thermostat Calibration: Regularly calibrating your thermostat ensures that your heat pump operates efficiently and keeps your home comfortable.
  • Inspecting and Tightening Electrical Connections: Loose connections can cause unnecessary noise and disrupt your heat pump's operation.
  • Refrigerant Levels: Maintaining the right refrigerant levels is essential for your system's efficiency.

Rattling noises from your heat pump can be unsettling. Let's explore the possible reasons behind these sounds and what you can do to address them.

Possible Causes of Rattling Noises:

  • Loose Hardware: Loose screws, bolts, or fasteners can lead to rattling sounds as the heat pump operates.
  • Debris in the Unit: Foreign objects or debris caught in the heat pump's components can create rattling when in motion.
  • Fan Issues: A misaligned or damaged fan can cause persistent rattling noises.

Buzzing noises coming from your heat pump can be perplexing. Discover the underlying causes and solutions for these unwelcome sounds.

Possible Causes of Buzzing Noises:

  • Electrical Issues: Faulty electrical components or connections can generate buzzing sounds.
  • Vibrations: Vibrations from the heat pump or nearby structures can cause buzzing, which may be addressed through proper insulation and mounting.
  • Refrigerant Flow Problems: Issues with refrigerant flow can result in buzzing or humming noises.

Before calling in the professionals, there are some troubleshooting steps you can take to address noise issues with your heat pump.

Key Troubleshooting Tips:

  • Inspect for Loose Parts: Check for loose or damaged components within the heat pump and tighten or replace them as needed.
  • Clean the Unit: Remove debris and obstructions from the heat pump, ensuring that the area around it is clear.
  • Check Electrical Connections: Verify that all electrical connections are secure and undamaged.

Modern Air Conditioners Increase Energy Savings

Air conditioner is a vital appliance for your home and comfort. It controls your home’s heat and air conditioning to ensure your comfort. However, a central air conditioner can use up a lot of power, especially if it’s an older one that isn’t very efficient. Efficiency improvements in air conditioners have been in focus in recent years.

Some people with older AC systems may not see a need to replace them if they are still functional. However, updating your cooling system with the help of air conditioner repair in Kansas City could be a great option if you want to save money in the long run and avoid costly repairs.

SEER rating in modern air conditioners

Seasonal Energy Efficiency Ratio, or SEER, measures how effective a unit of energy usage is throughout the summer months. An efficient system will have a high seasonal energy efficiency ratio (SEER) rating.

In a positive development, the required minimum SEER for air conditioners is rising. Older systems’ energy efficiency ratio (EER) may be six or lower, whereas current systems are 13 or higher. In slightly under two years, a minimum SEER rating of 14 will be mandated, up from the current minimum of 13. As the number rises, so does the effectiveness of the air conditioner.

Programmable thermostat

The newest air conditioning models also include programmable thermostats. The thermostat is the part of an HVAC system that monitors and adjusts the temperature. If accurate, your machinery will use less power while performing its tasks.

There are a variety of ways in which a smart thermostat might reduce utility costs. These units use a combination of timers, motion detectors, and geofencing to determine when to activate the HVAC system. That’s why they’re so effective at cutting costs when you’re away from home. This machine is incredibly effective because it allows you to control your home’s temperature even while you’re not there.

A modern thermostat allows you to program temperatures based on your routines. When you leave for the day and come back in the evening, the thermostat can make the necessary adjustments to the temperature. You may save money and energy by lowering the temperature when no one is home.

Energy saving features

Recent technological innovations have allowed for the creation of air conditioners that significantly reduce energy usage. Inverter technology is a feature of modern AC home appliances.

Your unit’s inverter regulates compressor motor speed in response to indoor temperature. Modern air conditioning systems are more adaptable than their predecessors and can make small daily adjustments. They won’t have to work hard to maintain a suitable temperature in your home. Along with inverter technology, today’s systems typically have a warning system to let you know when it’s time to clean or replace your filter. So contact  HVAC Contractor in Kansas City for all HVAC needs.

Call for our assistance

Delta T Heating and Cooling is here to assist you in choosing the best modern AC for your house. Before suggesting an upgrade, our professionals will understand all your heating and cooling needs and will look after any additional problems. Call us for AC service in Kansas City, KS.

Importance of maintaining your HVAC unit

Maintaining your air conditioner reduces 50% of your electricity bills. In addition, over time, regular maintenance of a furnace and HVAC units improves the coordination of moving parts.

For the customer’s convenience, Delta T Heating and Cooling assure you some of the best benefits, some of which are listed below-

Maintenance increases the energy -efficiency of the heating systems

  • When you schedule your maintenance service for your furnace, it works more efficiently. A well-maintained furnace has a generator that burns oil completely for combustion to work efficiently, requiring less energy to do the job. 
  • Energy-efficient heating systems such as furnaces and heat pumps consume less energy than less energy-efficient furnaces and heat pumps, drastically reducing your energy-utility bills.
  • In addition, cleaning or replacing the filter also helps with efficiency because your furnace can circulate air through your home more easily – instead of trying to force it through a clogged filter.

Whether you are in Kansas City, MO, Leawood, KS, or other parts of City, Missouri, and are searching for reliable and top-grade HVAC Near me, Delta T Heating and Cooling is the solution for all kinds of heating needs.  

Maintenance adds to the lifespan of the furnace and heat pumps

  • Regular maintenance by professional technicians can detect faulty thermostats, blowers, ignitors, air vents, and channels and replace old carbon monoxide detectors and air filters with new ones.
  •  Maintenance also includes inspecting the evaporator’s coils and refrigerant leakage and assessing how instantaneously and smoothly a heat pump reverses a process.
  • Delta T Heating and Cooling is one of the top-ranking HVAC Companies in Kansas City, delivering customer satisfaction guaranteeing heater tune-up, heater repair, heater maintenance, and heater installation at fair prices.
  • We provide reasonable, leading installation, maintenance, and repair in Kansas City, KS. All your heating services are schedulable on our website or through phone number – (9130687-1494.

Maintenance of the system guarantees safe breathing

  •  One benefit of maintaining your heat pump is that it ensures that you breathe toxin-free indoor air quality (IAQ). A poorly maintained heating system allows more allergens and potentially harmful substances to circulate indoors during the warm spring and summer months. 
  • Poor air quality is likely to undermine your respiratory health. 

Low IAQ levels have some severe consequences. A few severe problems include the following – 

  1. Asthma 
  2. Legionnaire disease/
  3. Common lung infections such as bronchitis.
  4.  COPD
  5.  Irritation in eyes
  6. Dry coughs and running nose
  7. Weak Immune System.
  •   Removing your dirty air filter and replacing it with a new air filter after every month, depending on the size of the filter, is undoubtedly an effective way to improve the air quality index of your spaces.    
  •  Delta T Heating and Cooling have been administering the leading, convenient, high-grade, safe, and fair pricing heater maintenance, heater repair, and heater Installation in Kansas City, KS, by licensed and professional HVAC technicians having experience in the implementation of services.

Maintenance service trims your energy- utility bills


  • Since maintenance involves holistic care of your HVAC system, every component works with flawless performance during maintenance.
  • Complete care right from the evaporator coil to the air channels is the prime requirement of your HVAC system. The customer’s convenience is the top priority of Delta T Heating and Cooling.
  •  Maintenance of your furnace and HVAC unit also fixes sounds from your unit and other defective parts at an affordable price.  
  • Complete care of your HVAC unit or furnace removes the extra load on your furnace and heat pumps for the heating cycle. A maintained HVAC unit or furnace instantly brings down your electricity bills.

Maintenance Provides safety in case of threats

  • Our convenient, affordable, safe heater Installation in Kansas City, KS, has high vendor rates, response rates, and customer -preference in terms of reliability, high – quality, and value for the customer’s time.
  • Installation of new components/ repair or replacement of old HVAC units safeguards you against possible future threats during winter.
  • As your most recommended HVAC Contractor in Kansas City, we are available for 24*7 emergency services for all residential and commercial purposes. 

Delta T Heating and Cooling is the ideal Furnace Repair in Kansas City  and a one-stop-shop for all heating equipment with authentic and five-star reviews on Google, Facebook, and other platforms.

5 Signs You Need Immediate Furnace Tune-Up

Most homeowners rely on their furnace to keep their homes warm all winter. Did you know that furnaces need regular tune-ups to keep them running efficiently?

Furnace tune-ups are crucial because they help maintain optimal furnace performance and prevent minor problems from becoming huge and expensive repairs. Just like any other kind of mechanical equipment, furnaces need regular maintenance to run properly.

Not sure if your furnace needs a maintenance tune-up? Here are five signs that it’s time to call a heating tune-up technician:

Signs You Need a Furnace Needs Tune Up

Rise in Energy Bills:

If you’ve noticed a sudden spike in your energy bills, it could be due to your furnace working overtime to heat your home. Furnaces should operate efficiently by using a specific quantity of electricity, so an increase in energy bills is often a sign that your furnace needs to be serviced. Reach out to Delta T Heating and Cooling for heating services in Kansas City.

Strange Noises:

If you are hearing strange noises from your furnace, it’s definitely time to call a technician for a tune-up. These noises could be anything from banging or popping to rattling or squealing, and they usually indicate something is wrong with the furnace’s internal components. Some of these sounds may cause explosions or a system failure if they are ignored.

Leaking Carbon Monoxide:

A furnace that is not vented correctly can leak carbon monoxide, which is a poisonous gas. Leaking carbon monoxide from your heating unit can lead to safety hazards and serious health problems. If you notice any strange odors or fumes coming from your furnace, it’s important to call a technician immediately for a safety inspection and heating repair in Kansas City.

You should also keep an eye on your heating unit’s pilot light. The pilot light usually burns blue, but if it turns yellow, that could be a sign of carbon monoxide poisoning.

Inconsistent Temperatures:

A furnace should be able to keep your environment warm. If you’ve noticed that the temperature in your home is noticeably hotter or colder, it’s probably due to a problem with your furnace. It is often caused by dirty furnace filters or a heater that is the wrong size for your home. A furnace tune-up can help you fix these problems and restore consistent temperatures in your home.

Constant Furnace Cycling:

A faulty wiring, a malfunctioning thermostat, or an issue in the fan motor can cause the heating system to turn on and off frequently. This furnace problem can waste a lot of energy and end up costing you more money in the long run. If you notice your heater cycling more frequently than usual, it’s time to call a technician for furnace repair.

If you’ve noticed any of these furnace problems, don’t wait to call Delta T Heating and Cooling at (913)-687-1494. Our team of certified furnace tune-up technicians can help you get to the bottom of the problem and ensure that your furnace is running efficiently. Contact us today to schedule furnace repair or furnace tune-up in Kansas City!

Checklist for Furnace Maintenance

As winter approaches in Kansas City and temperatures start to drop, it’s time to start thinking about furnace maintenance. After all, you don’t want your furnace to break down in the middle of a cold snap!

Points for Furnace Maintenance:

Here at Delta T Heating and Cooling, we’re experts in furnace maintenance and furnace repair in Kansas City. We’ve put together this handy checklist to help you make sure your furnace is ready for winter:

Air Filter

An air filter helps to remove dust, dirt, and other airborne particles from the air that circulates through your furnace. A clean air filter is essential for efficient furnace operation, so make sure to change it every 1-2 months to ensure efficient operation.

Lubricate Blower, Fans, and Other Moving Parts:

Blowers and fans are the moving parts in your furnace that circulate air. Lubricating these parts help to keep them operating smoothly and prevents them from overheating.

Furnace Burner:

The furnace burner is the part of the furnace that actually burns fuel (usually natural gas or propane) to create heat. Over time, the burner can become dirty, which can cause furnace problems. It should be cleaned to remove any built-up dirt or debris.

Furnace pilot light:

The furnace pilot light is a small flame that ignites the furnace burner. If the furnace pilot light goes out, the furnace will not operate.

Next, the color of the pilot light should be blue. If it’s not, there may be a problem with the furnace.

Electrical Connections

The heating system’s electrical connections should be checked yearly to ensure they are tight and free of any corrosion during the heating maintenance. 

Heat Exchanger

The furnace heat exchanger is responsible for heating the air. Over time, the heat exchanger can become cracked or damaged, which can be a safety hazard. If you see any, the heat exchanger will need a repair or replacement.

Connections to Gas or Oil Lines

If your furnace is powered by gas or oil, it will have connections to gas or oil lines. These connections can become loose over time, which can lead to safety hazards.

System Controls

The furnace system controls are the parts of the furnace that control the furnace operation. Over time, these controls can become worn or damaged, which can cause furnace problems.

Carbon Monoxide Levels

If your furnace is producing carbon monoxide, it can be a safety hazard. Use a carbon monoxide detector to test the air near the furnace. If the carbon monoxide levels are high, call us for furnace maintenance. So contact HVAC Companies in Kansas City to resolve your problems related to furnace and HVAC.


The furnace thermostat is the part of the furnace that controls the furnace temperature. Over time, the thermostat can become inaccurate, which can cause furnace problems.


If your furnace has a humidifier, it is crucial to check it yearly to make sure it is working properly. A humidifier can help to increase the comfort level in your home by adding moisture to the air. However, if the humidifier isn’t working properly, it can actually do more harm than good.

Now that you know what furnace maintenance tasks to complete, it’s time to get started! Schedule heating services in Kansas City with Delta T Heating and Cooling today to ensure your furnace is ready for winter. Give us a call at (913)-687-1494.

Seven Furnace Efficiency Tips To Save Energy

As the weather cools down, you find yourself spending more time indoors, and therefore, even end up using more energy as a result. Furnace efficiency is most important for enjoying a warm and comfortable stay indoors, especially in the coming months. 

Delta T Heating & Cooling Providing heating services in Kansas City and surrounding areas. It is essential to be smart in energy spending and smarter as the mercury dips outside. We have enumerated seven furnace efficiency tips, which could save you a lot of energy and money. 

Seven Tips To Save Energy This Winter:

  • Clean and Change Your Air Filters:

Since furnaces are used so actively in winters, the filters of your furnaces can get clogged with dust and dirt, thereby reducing the amount of warm air reaching inside your house. That will lead you to raise the temperatures of your heating systems, which will be a reason for higher electricity bills. Check your filters regularly and clean them every month. It is essential to change your filters at least every three months. 

  • Don’t Block The Air Vents:

Take a look around your house and check if there are any obstructions near your air vents. Remove any unwanted furniture or drapes that could block warm air coming from your furnace. Vacuum the vents opening to keep them clean and free of dust or dirt. 

  • Switch To a Smart Thermostat:

A smart thermostat is a smart way to save electricity in the winter. Programmable thermostats allow you to fine-tune and optimize your furnace as required. You can also program the thermostat to turn down when you are asleep or away and then set it warmer for just before your arrival back home. In winter, you can reduce your electricity bill by spending a little on a smart thermostat. 

  • Put on Your Woolens:

On days when it gets extremely cold, instead of just raising the temperature of your thermostat, it will be better to put on some warm clothes to feel comfortable indoors. Warmer clothing will save your energy as well as money. 

  • Weatherstrip Doors and Windows:

Most of the warm air in the house is lost through the gaps and crevices on doors and windows. You can put a stop to it by weatherstripping them. Additionally, door sweeps and draft stoppers can stop air from leaking out and give you some protection from the cold.

  • Upgrade Your Furnace:

Older furnaces usually have a lesser efficiency range than newer ones. Studies show that modern high-efficiency heating systems can provide up to 90%-95% efficiency. Buying a new model might also get you some offers and rebates and help you cut down on your energy bills. You must contact a certified furnace replacement in Kansas City, KS, for assistance in this regard. 

  • Get Regular Furnace Maintenance:

One of the surest ways to reduce your energy bills is to call for HVAC maintenance before the onset of winters. Getting your furnaces inspected by HVAC professionals will increase their efficiency and lifespan. 

We’re here to help!

If you are looking for a reliable furnace repair in Kansas City, KS – feel free to contact Delta T Heating and Cooling. Our qualified team will help you keep your home warmer. Just visit our website or give a call on (913) 687 1494

Why Is My Heat Pump Not Working?

Heat pumps are one of the most amazing inventions meant for our comfort. Unlike other HVAC systems, a heat pump can provide cooling and heating. However, like most machines, a heat pump can break down at any time. Nothing can be awful than a heat pump not blowing cold air on a hot sunny day!

There can be various reasons behind clogged air filters to malfunctioning thermostats. Before you contact a heat pump repair Kansas City, look at some of the most common reasons.

5 Reasons Your Heat Pump is Not Working

  • Power Issues

If your heat pump stops suddenly, check the power supply of your other heat pump system components. Each component might have its own power switches and dedicated circuits.

Firstly, check if the power switch near the indoor unit is ON. Secondly, the power switch located on the outside unit also needs to be set to ON. At last, go to your home’s electrical panel to examine the circuits controlling both the indoor and outdoor units.

If you see any tripped breaker or a blown-out fuse, call professional furnace replacement Kansas City KS.

  • Malfunctioning Thermostat

When heat pumps stop working, a malfunctioning thermostat can be the culprit. Locate the thermostat and see if the display is on or not. If it doesn’t display anything, it means there is no power supply.

However, if you have battery-powered units, just replace old batteries with new ones. While for the hardwired units, check your home’s electrical panel as mentioned above. 

  • Wrong Thermostat Settings

Apart from the disrupted power supply and dead batteries, a thermostat can go bad simply due to the wrong settings. Your thermostat only allows your heat pump to cool if temperatures inside your home rise above a certain point. Try adjusting the thermostat’s set temperature down several degrees, which should trigger the heat pump to run a cooling cycle.

  • Leaky Ductwork

Ductwork makes up a significant part of an HVAC system responsible for distributing the air. If your home’s ductwork becomes clogged due to a lack of cleaning, the heat pump won’t be able to blow adequate air. At the same time, any leaks will let the air out before reaching you.

In such cases, call professional heating services in Kansas City to examine the ducts for blockage and leaks.

  • Dirty Air Filters

As soon as your heat pump stops working, inspect the air filters. If you see a lot of gunk accumulated on them, it has probably blocked the airflow resulting in a shutdown. If this is the case, replace the filters with fresh ones and let the system cool down for a bit.

If your heat pump has stopped working, there can be one or more reasons listed above. Thankfully, we can fix this issue in no time. We take pride in performing the best heat pump and furnace repairs in Kansas City.

Ring us today at (913) 687-1494 to register and schedule a complete heat pump service at a minimal cost. You deserve the best!

What’s Making My Furnace So Loud, and What Can I Do About It?

It is normal for a furnace to make noise after some time if it’s not properly serviced. But if it makes noise more than usual then it could be a sign of a mysterious threat. Underlying problems in the furnace causing sound may lead to damage to the unit and the area around it.

Different Sounds That Your Furnaces Makes

Different problems will lead to different annoying sounds of the furnace. Loud screeching and rattling sounds could be evidence of a hitch in the blower motor which can be fixed with the assistance of professionals. Crushing of metals, humming, rattling pop and bang, etc. are some babble you may hear due to dirty burner, error in blower wheel, loose or damaged Blower belt.

Cause of These Sounds

Dirty burners can lead to explosions and their underlying problem can be noticed by boom or band sound. Delay in spunk can cause gas to collect and boom when the ignition turns on. To prevent such mishaps burners require annual inspection and cleaning by professionals to keep air and fuel in equilibrium. Sometimes boom sound can also be caused by contraction and expansion of metal ducts. 

If proper action is not taken in time can lead to destruction and furnace replacement in Kansas City, KS can be pricey. We are available to help you with the assistance of technical experts. Electronic and heat appliances require timely amenities and we are here to provide you fair and reliable system services at a reasonable price.

How To Care For Your Furnace?

We are licensed with professional engineers to meet the needs of clients. furnace repair in Kansas City will be cost-efficient with us. We will provide a satisfactory outcome because our name means everything to us. Our clients always provide us with sufficient remarks and reviews. We will provide you with a qualified HVAC technician for a furnace device inspection. 

Sometimes a furnace demands more than just lubrication and oiling. A furnace is a technical unit that will require assistance from professional technical. Fixing the furnace on your own can even lead to further damage to the device and yourself as it is filled with fumes. Furnace damage is not only limited to tightening loose screws or changing a belt. Sometimes, a part of the unit holding crack or leak needed to be replaced, which can be best guided by our professionals.

Neglecting a furnace for a longer period can cause an interchange of fuels in it and will release toxic fumes like carbon monoxide in your home. This usually happens due to declining heat exchanger problems for a long period. The most common problem in furnaces is related to heat and we offer abetment in heat pump repair in Kansas City.

Winters in Kansas City can be cold. Our team provides you services in the HVAC system so in case a problem occurs you can contact us. We are always delighted to help with additional issues such as heating installation, furnace, and heating maintenance, heating system, dependable heating replacement, heating services, thermostats, and more. All you need to go to our website and book a schedule with our professional for assistance of HVAC near you

HVAC For Beginners: Significant The Components and What They All Do

Is It Important To Know The Components Of HVAC Systems?

Heating, ventilation, and air conditioning systems not only regulate the temperature of a space (mostly indoors) but are also responsible for delivering clean air to ensure comfort when required.

Because your system includes various components, knowing about them is quite useful for appreciating the quality of their construction and mapping out what your system may need to perform as you would like. Let’s understand the components and their uses in brief.


Temperature sensors on thermostats tell them when to turn on or off the heater or air conditioner. Different thermally controlled zones could exist, each needing its thermostat. 

It would help if you positioned the thermostat at least two meters away from areas where temperature differences are concentrated compared to the average temperature of the intended space. If you need services of HVAC near you. contact us.

Heat Generator

When it comes to heating, the heat generator is the most important HVAC component. Fuel is burned inside combustion chambers to produce heat, like in a furnace. 

Flue gas heat will then be transferred to nearby air or another fluid, such as water, to heat the air in the conditioned environment. It is also possible to heat the air by using electric heat generation. Schedule a heat pump repair in Kansas city with Delta T Heating.


Blowers are responsible for forcing air through the heat exchanger into the air ducting to take the warm air to its destination. Powered by an electric motor, a shaft drives the blower. By changing the motor speed, you can adjust the flow of air. Variable speed motors are recommended for such applications.

Condenser Coil Or Compressor

The compressor or condenser coil is usually located outdoors, and it is one of the key components of the HVAC system. Upon warming up, the refrigerant gas goes to the compressor and becomes liquid in the atmosphere. The liquid refrigerant is transported by copper or aluminum tubes. A fan will increase airflow, thereby increasing condensation.

Evaporator Coil

Evaporator coils are among the indoor components of HVAC systems that receive condensed liquid refrigerant from the compressor. A spray nozzle atomizes the liquid refrigerant, causing it to evaporate faster when it has contact with the warm air present in a room.

Air Ducts And Vents

Different components of the HVAC system receive air via ducts. For a zone to receive high-quality air, ducting must be of good quality. The system could make noise if there is a leak in the ductwork. If the air ducts are in bad condition, odors and excess moisture can fill the air.

Heat Exchanger

Heating and air conditioning systems include heat exchangers that convert heat from heat generation units into other fluids. Control units may activate the heater or electric heating elements to regulate the air temperature passing through a heat exchanger.

Call (913 687-1494) or schedule a furnace repair in Kansas City with Delta T Heating and Cooling. We also provide heating services in Kansas City and surrounding areas.

What Happens During An Air Conditioning Repair Service?

What Can You Expect During An Air Conditioning Repair Service?

A modern Air Conditioner has a life of 15-20 years; in all these years of service, it is necessary to get your AC repaired at regular intervals, usually once a year. And if you live in the hot and humid city of Kansas, where AC is a large part of lifestyle and comfort, it becomes more critical. But what does an air conditioner repair in Kansas City include? That’s precisely what we are going to talk about in this article! Read on to know.

Cleaning And Checking Up

While working, the AC takes in the dust in the atmosphere, and it gets deposited in the pipes/tubes inside the unit, which can lead to water leakage. These leakages are the first thing technicians inspect in a unit; the deposited dust and debris are cleaned to fix this.

Cleaning Fin and Air Filter

Fin allows the air to flow smoothly throughout the unit and a filter’s job is to keep the air clean by catching pollutants. However, the deposition of mold and debris can lead to ice formation. That’s why it is necessary to clean the fan and filters so that the unit works efficiently.

The Evaporator And Condenser Coils Are Cleaning

The evaporator coils collect the heat from the indoor, and the condenser coils let this heat out. This function is crucial to the proper functioning of the entire AC unit, and it can’t be done correctly if the coils are jammed with dust and debris. Therefore, other essential AC fans are also cleaned in an AC tune-up in Kansas City, KS.

Testing Coolant Level

A coolant takes away the heat from the refrigerated area and produces a cooling effect. A drop in the coolant level, lower than the average level, affects the overall cooling and may cause your AC to stop.

Cleaning Condensate Pan

The moisture from the evaporator coils is collected in the condensate pan, then removed by a drain. This can sometimes lead to clogging if it is not appropriately cleaned at regular intervals.

Checking The Thermostat

A thermostat maintains the temperature and makes sure that your home gets the perfect cooling experience. These are usually of two kinds – Electronic and Electromechanical. If your thermostat keeps switching on and off or shows incorrect readings, or is old, then it may require servicing. If you need AC replacement in Kansas City, contact us.

All-Around Inspection

All around inspection includes checking all the other components and devices that contribute to the proper functioning of an AC unit. This includes:

  1. Inspection of and fixing all the faulty electric connections, writings, switches, capacitors, and relays.
  2. Lubricating and cleaning the motors and fans.
  3. Efficiency and safety checks.

AC repairing usually takes a couple of hours, which can make your AC more efficient. To ensure this, you need only the best AC service in Kansas City, KS. Delta T Heating and Cooling are perfect for your AC! We provide the best customer service at reasonable prices. Contact us (913) 687-1494 or drop a mail at [email protected] to avail of a service.